If you have the Blue Ox Avail Non-Binding Tow Bar part # BX7420 and need to use this with Roadmaster base plates you'll need to use either the Blue Ox Tow Bar to Roadmaster Base Plate Adapter part # BX88178 for the crossbar style (EZ, XL) or part # BX88185 for the direct connect style (EZ5, MS, and MX). view full answer...
Yes, if you could mount the brackets of the Curt TruTrack part # C17500 back 30 inches from the coupler ball hole then they would fit easily. view full answer...
If the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black # LC95VR looks like what your 2011 Tiffin Allegro Open Road 35QBA has for the entry door then it will work. It has an overall length of 9-1/2" which you can compare to what you currently have on your motorhome along with the attached installation instructions.
This is a universal kit so there aren't specific RV fits listed for this product. view full answer...
The Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening # RM-195225 is the carrier you need for the 22.5" wheels on your 2012 Tiffin Allegro 30GA. It has the extra long opening for the 11-1/4" lug pattern of your wheels to securely mount to the carrier.
The Roadmaster Spare Tire Carrier # RM-195125 will only allow for wheels with a lug pattern of up to 8".
A etrailer Spare Tire Lock # e98892 will secure a wheel that is between 1/4" to 7/8" thick. view full answer...
The correct SumoSprings Solo Custom Helper Springs for a 2008 Tiffin Allegro Motorhome on Freightliner Front End Diesel or FRED Chassis is part # SSR-502-54 for the rear and part # SSF-501-40 for the front. view full answer...
According to my research your 2014 Tiffin Allegro 32CA motorhome has 235/80R22.5 tires. This means that they have an overall diameter of 37.3" so the correct Adco Ultra Tyre Gard RV Wheel Covers for your application is part # 290-3950 which comes with 2 covers that fit 36" - 39" diameter tires. These will be the same kind of white color that comes with your Designer cover. view full answer...
The # A91AB Optronics Trailer Clearance and Side Marker Light will work as a replacement for your current marker light. This has the same 2-1/2" x 1-3/16" dimensions as your current light and accepts the standard 2-prong plug which would be the the 2-pin connection you are describing. This has light has the same two tabs you mentioned on each end to fit in your mounting bracket.
If you would like to replace both lights there is also an LED option which is the # AL91AB Thinline LED Clearance... view full answer...
I called Air Lift to confirm, and you are correct in that the LoadLifter 5000 Ultimate Air Springs, part # AL88240, are not compatible with your 24,000-lb chassis.
We do, however, have springs that are compatible. They are the SumoSprings Rebel Custom Helper Springs, part # SSF-173-40-2. These jounce-style springs are much easier to install and maintain than air springs, and they react appropriately to different loads (rather than the air springs needing manual adjustment when under different... view full answer...
The gear on the Lippert # LC379147 motor meshes with the gear in the gear box. If the old gear box is fine then you will just reuse it. Same for the controller. Hold onto the old motor, or at least photograph the stickers in case that information is need later. view full answer...
Yes, this is exactly what the MaxxTow Dual Hitch Extender for 2" Trailer Hitches, # MT70070 is intended for. However, keep in mind that per manufacturer this reduces your hitch rating by 50%. The extender has a weight rating of 400 lbs. tongue weight and gross trailer weight rating of 4,000 lbs. so please compare this to the vehicle you are flat towing. While the # MT70070 is designed to allow you to add an accessory such as a bike rack and use the tow bar, you cannot use an additional... view full answer...
The trailer brake controller in the cab of the motorhome won't interfere with the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700. They are two completely separate systems which do not interact with one another. The trailer brake controller controls electric brakes and the supplemental braking system controls hydraulic brakes. view full answer...
The Roadmaster Rear Anti-Sway Bar for Motorhomes # RM-1209-130 is the correct fit for your 2007 Tiffin Allegro Bay 37QDB Motorhome on Freightliner FRED chassis. This is the only confirmed fit. view full answer...
The fireplace model you mentioned, DFR2551L, is actually a Dimplex model and not one we carry. We do have a fireplace that may be a replacement option.
The Greystone 26" Electric Fireplace with Crystals - Recessed Mount - Black # 324-000068 is the closest option we have.
It is a 26" fireplace with cutout dimensions of 26-1/4" wide x 20-1/2" tall x 5-3/8" deep. You will need to measure the cutout for the location in your RV to check for a fit. view full answer...
You need to determine if the 2-1/4 inches of drop of the Curt # D210 is appropriate with your tow dolly. Find the difference from your 21 inch measurement on your RV's receiver and the distance from the ground to the bottom of the dolly's coupler. This is how you find the rise or drop you need in a ball mount. If the 2-1/4 inch drop of the # D210 works with this then you'll be fine.
You shouldn't have any issues using the Thule T2 Pro XTR, part # TH83JV, with the ball mount. You should... view full answer...
The correct SumoSprings Rebel Custom Helper Springs for the front of a 2016 Tiffin Allegro 34PA Motorhome is part # SSF-173-40-2. I highly recommend the SumoSprings instead of Timbrens as they have a much smoother ride and are the more preferred option over Timbrens among RV owner's. view full answer...
We have a great replacement wiper blade that fits your 2014 Tiffin Open Road 34TGA with the Wiper Technologies part # WPR47FR but ClearPlus does not have a fit for your motorhome. view full answer...
These are designed to work with Counteract tire balancing beads which most likely isn't what you have. If you are looking for just a standard valve core we unfortunately do not have that at this time. view full answer...
Stabilizers are designed to dampen side-to-side movement of the wheels while sway bars are designed to reduce body roll during fast cornering and since RVs tend to sway side to side when traveling adding in anti-sway bars like the Roadmaster Front Anti-Sway Bar # RM-1139-148 will help with swaying when traveling and making turns. view full answer...
Yes, the Replacement Entry Door Hinge part # LC198295 would work on your Tiffin Open Road 35QBA motorhome. This is a standard RV door hinge like what your Tiffin would have currently. view full answer...
We do have keyless entries that are for a camper, so long as it is on the left side of your door, and if you measure your cut out and it is 3-3/4" tall x 2-3/4" wide, you can use an option from Global Link:
- Global Link Ultra E Pro Electronic Lock for Travel Trailer # 295-000183 view full answer...